月度存档: 十一月 2018

怎样在Win10里面从IDE/RAID换成AHCI

  1. Right-click the Windows Start Menu. Choose Command Prompt (Admin).
    1. If you don’t see Command Prompt listed, it’s because you have already been updated to a later version of Windows.  If so, use this method instead to get to the Command Prompt:
      1. Click the Start Button and type cmd
      2. Right-click the result and select Run as administrator
  2. Type this command and press ENTER: bcdedit /set {current} safeboot minimal
    1. If this command does not work for you, try bcdedit /set safeboot minimal
  3. Restart the computer and enter BIOS Setup (the key to press varies between systems).
  4. Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
  5. Save changes and exit Setup and Windows will automatically boot to Safe Mode.
  6. Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
  7. Type this command and press ENTER: bcdedit /deletevalue {current} safeboot
    1. If you had to try the alternate command above, you will likely need to do so here also: bcdedit /deletevalue safeboot
  8. Reboot once more and Windows will automatically start with AHCI drivers enabled.

Refer: http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-operation/